text.skipToContent text.skipToNavigation
Choose your language


Precision slides roller mounted with end plates and location holes

  • Slide bearings in hardened and ground prism guides
  • Dimensioned for dynamic and static loads of up to 1050 N
  • Service life of over 1 million lifting operations
  • Different sizes with strokes from 15 to 95 mm
  • Centring holes
Special features:

from £385.15

plus sales tax
7 results found


Bright, ground.
These precision slideways with roller bearings are used in machine and fixture construction, metrology, optical instruments and precision engineering.

The stated permissible load values (F) are designed for a service life of 1 million travel cycles.
The torque values apply only to centred slides.

An additional centring hole is located at holes D2 and D3 on the top of the slide. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240.

F = permissible loading for dynamic and static loads.
TI E/E1 = number of fastening holes E/E1/M inside.
TA E/E1 = number of fastening holes E/E1/M outside.
TI E4 = number of fastening holes E4/D1 inside.
TA E2 = number of fastening holes E2/D1 outside.