text.skipToContent text.skipToNavigation
EN
Choose your language

22071

V-belts DIN 2215

  • Antistatic
  • Endless design
  • With polyester tension cords
  • Equal length
Special features:

from £5.74

plus sales tax
  • 1(current)
  • 2
  • 3
354 results found
  • 1(current)
  • 2
  • 3

Description

Material
Neoprene with polyester tensile cord.
Note
Endless V-belt acc. to DIN 2215 (classic V-belt). Electrically conductive acc. to ISO 1813. The V-belts are of equal length (from 1000 mm).

The V-belts have limited oil resistance. Avoid continuous contact with mineral oils and grease as these will reduce the service life.
Temperature range
-55 °C to +70 °C.
Service life is reduced if the V-belts are exposed to continuous temperatures above +60 °C.
Assembly
The belts need to be tensioned after installation. Re-tensioning is required after an initial run time of 15 - 20 minutes.

If, by a drive with several belts, one belt requires changing, then the full belt set should be replaced.