Flat Clamp
for t-slot
stainless steel
hardened and nickel plated
- Workpiece clamping with positive down force
- Ideal for flat workpieces
- Stainless steel parts hardened
£135.04
plus sales tax
Added to your shopping cart
Designation
Flat Clamp
Version 1
for t-slot
Version 2
hardened
Body material
stainless steel
Component material
stainless steel
Body surface finish
hardened and nickel plated
Component surface finish
hardened and nickel plated
B=Width
62
BN=Slot width
22
D=Thread
M20
H=Height
35
L=Length
155
M1=Tightening torque Nm
300
M2=Tightening torque Nm
240
C1
11
F (kN)
36
F1 kN
18
SW
17
Description
Material
Clamping element (front) steel 1.7225.
Retaining element (rear) steel 1.0503.
Cap screws and slot keys grade 8.8 steel.
Retaining element (rear) steel 1.0503.
Cap screws and slot keys grade 8.8 steel.
Version
Body parts hardened and nickel-plated.
Fasteners black oxidised.
Fasteners black oxidised.
Note
Particularly low workpieces can be clamped using the T-slot clamps. The positive down force helps to hold the workpiece down on the machine table.
Application
1. Slide the clamp in the machine table T-slot up to the workpiece.
2. Tighten the fastening screws with the appropriate torque.
3. Tighten the clamping screw to clamp the workpiece in place.
2. Tighten the fastening screws with the appropriate torque.
3. Tighten the clamping screw to clamp the workpiece in place.
Important note on downloading CAD models
In order to download our CAD models, you must log in first. If you have not created an account yet, please register under "My Account" (right side of the screen) and follow the instructions.